Then you can apply the notch to cut another frame during the Notch process. Next, convert it to an iPart, select the notch profile when authoring the iPart, and publish it to Content Center.
You can sketch a notch profile together with the base profile, and extrude the base profile. Curved or merged beams cannot be trimmed by or extend to a curved surface. However, Miter does not support two curved or merged beams. End treatments of a spline curved frame are trimmed through tangent direction. End treatments of an arc curved frame are trimmed following the curve shape. You can also cut treatments on curved or merged members. For a straight frame member with a miter on each end, such as an angled beam between two opposite inside corners, the correct frame length computes automatically. If you want to reuse a frame member but want a different end treatment, change the end treatment first and then reuse the frame member. You can reuse a straight frame member with its existing end treatment. For example, you can apply miters or mixed end treatments to three frame members that meet to form a corner. End treatments are accumulative, and can be mixed. Add (model) the drain hole information or your custom information and save the end cap. Save your custom end cap to a designated location. Accept the defaults or enter the size you require and pick Custom as the option for placement.
In Frame Generator, several commands are available for modifying frame members and applying end treatments. Open from Content Center and select our family with the drain hole.
0 kommentar(er)
